Hi Guys -
For any waterpumps, i'd get them from Bill Bolton. He has the right
ones (high quality rebuilds) and they are quite reasonable in price.
That plus Bill is a good guy...
Regards,
Alan
'53 BN1 '64 BJ8
On 7/5/05, Healeyguy@aol.com <Healeyguy@aol.com> wrote:
> Jim et al
> The Moss pump offered has that incorrect thread info in the computer
> (regarding the heater connection) if the saleman notices the computer notes
>when
> your ordering. Due to my and probably others bagering them they are trying to
> correct the thread size problem on the next generation from their suppliers.
>The
> thread is a vey unusal one, if I recall 16 TPI.
> Aloha
> Perry
>
>
>
>
> I am installing a newly purchased water pump on my 100-4 and am finding it
> to be a close reproduction of the original. However two fatal flaws exist:
> (1) the heater hose tube is a different hole size and thread, thus
> preventing replacement of the brass shut-off valve and (2) the casting and
> machining prevent tightening all 3 nuts that hold the pump to the block.
>
> Be aware of this when purchasing a new pump, it is likely there are many
> with these negative qualities.
>
> I will not mention the supplier as they are know for their quality products.
>
> Best Regards,
>
> Jim LeBlanc
>
> 1956 100-M
|