Bob
If you got to Larry Varley's web site there is a chassis drawing for BN4 to BJ7
cars that has the holes in question shown. See
http://www.acmefluid.com.au/larry/chassis.tif
It appears to be an revision to the original drawing but the holes are
dimensioned both for size and location. Still don't know which suppliers may
have the replacement plugs for sale. I would think the regular solid hole
grommets as used elsewhere on the car that are the appropriate hole size would
work.
Aloha
Perry
In a message dated 7/28/2004 12:16:58 PM Eastern Daylight Time, "Bob Spidell"
<bspidell@pacbell.net> writes:
>Whew!
>
>Nothing worse than starting the day thinking you have extra holes ;)
>
>Thanks, Perry.
>
>
>bs
>********************************************
>Bob Spidell San Jose, CA bspidell@pacbell.net
>'67 Austin-Healey 3000 '56 Austin-Healey 100M
>********************************************
>
> ----- Original Message -----
> From: Healeyguy@aol.com
> To: bspidell@pacbell.net
> Sent: Wednesday, July 28, 2004 8:54 AM
> Subject: Re: Frame Plugs
>
>
> Bob
> Plugs are original if rubber. My BJ8 and other cars I have seen have them.
>Availability from vendors, I'm not sure.
> Aloha
> Perry
|