Ron,
See: http://www.team.net/www/healey/tech/big_hly/gearbox/cltchpvt.html
Bob
Ron Fine Esq. wrote:
> There is a tapered pin fixing the fork to its shaft. The book says drive it
> out with a drift but it is not clear which way to drive it out. If it is a
> tapered pin there is only one way to drive it out. I assume that the correct
> way is from the rear of the bell housing with a long punch through a small
> hole that appears to be in the right position in the bell housing for this
> purpose but I have been hitting it fairly hard and I get no movement. If I
> have to replace the pin does anyone sell it? Any help is always
> appreciated.
|