Re: [Fot] Rear Main Cap

[Charly via Fot <fot@autox.team.net>]

Do you have it on backward?
What happens if you flip it 180° ?
Charly Mitchel
TR6 #44
On Sat 18/03/23  7:56 AM , Rick Parent via Fot fot@autox.team.net sent:
> Never, ever change caps without align honing, you can swap bearing
> though.
> Rick Parent
> "_Doing the right thing is always the right thing, regardless of
> consequences_ "
> On Saturday, March 18, 2023 at 06:21:25 AM MST, Rod Pierce via Fot
> wrote:  
> The image shows the rear main cap and bearing on a small journal
> 1300.
> As you can see, there is an offset between the two bearing halves. 
> I was attempting to mix and match parts from my parts bin.
> I'm curious about the source of the offset.  Is there a difference in
> end caps from year to year on the 1300 or is there a difference from
> engine to engine when they were manufactured?
> _______________________________________________
> fot@autox.team.net
> 
> http://www.fot-racing.com [1]
> 
> Donate: http://www.team.net/donate.html [2]
> Archive: http://autox.team.net/archive [3] 
> http://www.team.net/pipermail/fot [4]
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/rick.parent@att.net [5]
> 
> 
> Links:
> ------
> [1] http://www.fot-racing.com
> [2] http://www.team.net/donate.html
> [3] http://autox.team.net/archive
> [4] http://www.team.net/pipermail/fot
> [5] http://autox.team.net/mailman/options/fot/rick.parent@att.net
> 
> 

_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/fot/mharc@autox.team.net