I found that the plain old 'Aviation' Permatex worked just fine for this
application.? Never had one leak.
Jack
On Wednesday, September 13, 2017, 10:59:01 PM EDT, Tony Drews via Fot <fot
at autox.team.net> wrote:
Hylomar is often used where there are no gaskets.
Tony Drews
At 06:12 PM 9/13/2017, Joe Curry via Fot wrote:
I am undertakingthe refurbishment of a D-Type overdrive unit and I see that
there is nogasket between the brake ring and the halves of the case
assembly.?The Haynes manual specifies using ?jointing compound? on the
matingsurfaces.? What is the recommended stuff that is available today forthis
purpose?
?
Thanks,
Joe C.
?
Sent from my HAL-9000
?
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Donate:http://www.team.net/donate.html
Archive:http://www.team.net/archive
Forums:http://www.team.net/forums
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170923/1d4763e5/attachment.html>
|