fot
[Top] [All Lists]

Re: [Fot] Front main bearing cap

To: "'Bill Babcock'" <ponobill@gmail.com>, "'FOT Triumph'" <fot@autox.team.net>
Subject: Re: [Fot] Front main bearing cap
From: "Joe Curry" <spitlist@cox.net>
Date: Mon, 9 May 2016 23:37:14 -0700
Authentication-results: cox.net; none
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
Thread-index: AdGqgCaQk+BxNwQfQLetPh5y3wKSswABi1bQ
It would be most helpful to know which engine?



-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of Bill Babcock
Sent: Monday, May 09, 2016 1:41 PM
To: FOT Triumph
Subject: [Fot] Front main bearing cap

Anyone have one they could sell me? I'm tearing down one of peyote's engine
and found the front cap cracked in half. It was holding the crank in fine,
the bearing and crank look perfect, but it was broken in place. I used to
have a spare block I could have robbed, but can't find it. 

I assume a good machine shop can grind the joint face bore the ting round to
spec. Anyone done this before? Any problems or suggestions?

Bill
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/spitlist@cox.net



_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>