I'd just drill it out and press in a new one.
Joe C.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Robert MacKenzie
Sent: Wednesday, May 26, 2010 7:09 PM
To: fot@autox.team.net
Subject: [Fot] Spitfire Flywheel Bolts - Part 2
Thanks to everybody for the advice I received today.
I pulled the gearbox earlier today and the clutch and flywheel fell on to
the floor. Never a good sign.
The four flywheel retaining bolts and the pin in the crankshaft have sheared
off flush with the end of
the crank.
I think I should be able to extract the broken bolts out but I could use
some recommendations on how to remove the broken pin.
Is it just pressed in place?
Robert
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|