Thanks to everybody for the advice I received today.
I pulled the gearbox earlier today and the clutch and flywheel fell on to
the floor. Never a good sign.
The four flywheel retaining bolts and the pin in the crankshaft have sheared
off flush with the end of
the crank.
I think I should be able to extract the broken bolts out but I could use
some recommendations on how to remove the broken pin.
Is it just pressed in place?
Robert
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|