Look at what is available at McMaster-Carr in aluminum or bronze.
OD 1.325 ID .625 Lgth 2.25
-----Original Message-----
From: Steven Belfer <colordog.1@earthlink.net>
To: Friends of Triumph <fot@autox.team.net>
Sent: Sun, Jan 10, 2010 12:14 pm
Subject: [Fot] Leaf Spring Eye Bushing
Anybody out there know of a Polyurethane or Aluminum bushing that fits the
front eye of the TR3 leaf spring? (not the rear shackle kit)
I had to take an angle grinder to the spring eye pin to get it out and
destroyed my dad's custom aluminum bushing in the process.
I'm wondering if anybody out there may know of a part number for a modern car
(or small truck) to save me a little leg-work.
I found a place that can make me a custom bushing but I'd prefer to find
something off the shelf if possible.
Dimensions: L 2.25" W 1.325 Hole: .625"
By the way the replacement Stock bushing from Moss does not fit onto their new
pin.
~Steve
Suggested annual donation $12.96
You are subscribed as n197tr4@cs.com
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|