Modern answer -- drill a hole and insert a zip-tie base.
--Rocky
----- Original Message -----
From: "Mark Eginton" <markconsultation@twcny.rr.com>
To: <fot@autox.team.net>
Sent: Sunday, January 04, 2009 5:48 PM
Subject: [Fot] Metal Question
> As one of those classic projects that just keeps getting deeper, I
> stripped
> the engine compartment of my TR 3. Picture the tabs used to bend around
> the
> wiring harnesses that have been bent back and forth for 50 years. If I
> heat
> them till red and let them cool slowly, will the atoms reknit eliminating
> stresses from all the bending or will I end up with burnt toast?
>
> Happy New Years - got pistons etc for Christmas - Santa been berry good to
> me...
>
> Mark
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|