It will anneal them, which is not exactly the reknitting process you
hope for, but it might relieve enough of the work hardening to keep
them from breaking right away. You need to make sure to let the metal
cool very slowly.
On Jan 4, 2009, at 1:48 PM, Mark Eginton wrote:
> As one of those classic projects that just keeps getting deeper, I
> stripped
> the engine compartment of my TR 3. Picture the tabs used to bend
> around the
> wiring harnesses that have been bent back and forth for 50 years. If
> I heat
> them till red and let them cool slowly, will the atoms reknit
> eliminating
> stresses from all the bending or will I end up with burnt toast?
>
> Happy New Years - got pistons etc for Christmas - Santa been berry
> good to
> me...
>
> Mark
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
Bill Babcock
Babcock & Jenkins
Billb@bnj.com
503.936.7660
www.bnj.com
Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal
Bill@kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|