Hi,
I run 22mm at front and 17mm at rear. My springs are stock items. I lowered
the front as you did and the rear with fitting shims between spring and
axle. I don't set the car too flat cornering, I like it waving around and
the lean over. Good at wet races too.
Chris
-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von Gary Horstkorta
Gesendet: Dienstag, 4. November 2008 02:50
An: fot@autox.team.net
Betreff: [Fot] sway bars
I am currently racing my 1962 TR4 with a > ADDCO front sway bar, the car
has been lowered approx. 2 (removed front spring spacer, de-arched rear
leaf springs), runs on Hoosier Speedster tires (185/65R15) with zero
negative camber and find the car leans over at a pretty good angle while
cornering. I am considering trying a larger diameter front sway bar to help
minimize the lean. Any thoughts as to a suitable diameter? Thanks.
Gary
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
[demime 1.01d removed an attachment of type image/jpeg which had a name of
FPS_15729 Kopie.jpg]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|