I have one of Mordy's blankets on my TR-4A. It's never been tested but I like
having it on there. It has an added benefit in that at speed any oil lost
from the engine collects in the blanket and then forms a nice puddle on the
ground once I get back to the paddock. Its been very helpful in chasing my
oil leaks. Small puddle = normal. Big puddle = problem. Don
-----Original Message-----
From: "Henry Frye" <henry@henryfrye.com>
To: fot@autox.team.net
Sent: 7/5/07 12:52 PM
Subject: Re: [Fot] Scatter Shields
I bought one of these and never installed it. Went a different route.
If anyone is interested in buying it, contact me offlist.
-----Original Message-----
From: "MDunst/Gasket Works" <gasket.works@verizon.net>
Cc: "fot@autox.team.net" <fot@autox.team.net>
Sent: 7/5/07 12:03 PM
Subject: Re: [Fot] Scatter Shields
Some several years ago... I took a TR4 tranny to Diest safety (they have
been making these ballistic fabric scatter shields for years) and had
several made up to fit the TR3/4/6 bellhousing and box. I can't recall how
many people ordered them . They were easy to apply and had an SFI
designation.
M. Dunst
www.headgasket.com
Gasket Works USA, LLC
626.358.1616 Voice
626.628.3777 Fax
GMT -8 Pacific
henry@henryfrye.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
ofbracing@nefcom.net
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|