| To: | "team" <fot@autox.team.net> |
|---|---|
| Subject: | Gas No gas MIG |
| From: | "Robert Dardano" <19to1tr6@attbi.com> |
| Date: | Sat, 8 Mar 2003 19:35:50 -0500 |
Can anyone sujest the proper fluxcore wire to use for Tr-6 body pannels?My welder will take .023 up to .035 The rolls are not cheap so I would like to start with the right one for the job I have no experiance with welding but its something I have wanted to learn. The 2lb starter roll was .035 and if I have learned anything it seems I should be useing a lighter gauge. thanks in advance rob |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | g-prod spitfire on e-bay, Jeff Senty |
|---|---|
| Next by Date: | Re: crank bolts, MARK J WEATHERS |
| Previous by Thread: | g-prod spitfire on e-bay, Jeff Senty |
| Next by Thread: | RE: Gas No gas MIG, Bill Babcock |
| Indexes: | [Date] [Thread] [Top] [All Lists] |