Rick, For what its worth....After shaking the original flywheel off my crank
I installed an aluminum flywheel and put 4 additonal bolts in the end of the
crank, using ARP bolts and lots of torque. No dowel pin. A local machine
shop drilled and threaded the crank. No problems since then.
Mark Weathers 72 TR6
----- Original Message -----
From: <RJunkermei@aol.com>
To: <fot@autox.team.net>
Sent: Thursday, March 06, 2003 7:53 PM
Subject: crank bolts
> Hi Ive seen from time to time talk about the addition of bolts and talk
of
> which bolts to use on the tr6 flywheel is the general thought to add one
> dowel pin and two additionial bolts and does anyone know of a good place
to
> do this Rick j
|