Currently the Moss TR rear seal conversion is sourced from a UK
manufacturer. The instructions are added to the kit in the US. The
instructions were prepared by the Moss R&D department, after having
difficulties with vendor supplied information.
The recommended machined diameter for the seal now supplied is 2.500"
+0.005" -0.00"
Hope this clears up any confusion.
Kelvin Dodd.
> -----Original Message-----
> From: tr3a@att.net [mailto:tr3a@att.net]
> Sent: Friday, November 22, 2002 12:32 PM
> To: fot@autox.team.net; vintage-race@autox.team.net
> Subject: Re: Cats and Cranks
>
>
> >There appears to be two manufacturers, both in Great Britain, and
> > one of the manufacturers told me that the Moss kit is a
> knockoff of the
> > other kit.
>
> My rear seal kit, purchased from Moss, had instructions which
> were from
> British Parts Northwest. That's a big whoops on Moss' behalf!
>
> Jack Brooks
|