The seal that Ken at BFE has is a 2.520 or 64mm.
M. Dunst
Gasket Works USA, LLC
626.358.1616 voice/page
626.358.7971 fax
www.headgasket.com
----- Original Message -----
From: <WEmery7451@aol.com>
To: <Malaboge@aol.com>; <fot@autox.team.net>; <vintage-race@autox.team.net>
Sent: Thursday, November 21, 2002 6:27 PM
Subject: Re: Cats and Cranks
> In a message dated 11/21/02 6:06:31 PM Pacific Standard Time,
> Malaboge@aol.com writes:
>
> << They offer 2 different sizes of rear crank seal (both rubber lip
styles).
> 2.500" and 2.520" are the 2 choices. I have always run the scroll seal, so
> have no experience with either of these seal types...so,...I have come to
the
> fountain of knowlege for a taste...who has feedback on these seals? Who
knows
> where the 2 different seals are sold? Who makes 'em? What are the seals
from?
> Which seal is easier to find? etc etc >>
>
> I will be waiting for the more knowledgable responses to this question.
> Several years ago, Jack Wheeler sold me a seal holder that holds a big
block
> Chevy rear seal. I have a holder and a seal, but never had the grooves
> turned off of a crank to use this setup yet.
|