I've always had great success with Berryman's Chem-Dip for cleaning carbs -
gallon can with basket to hold parts.
Like Graeme said, brush off the loose stuff first.
Soak the disassembled parts overnight with the lid on. If there's any
remaining deposits, then use an old toothbrush to brush them with the same
solution. Dunk em once more, and they come out clean as a whistle. You can
cut a piece of plastic from a milk jug to act as a wedged-in separator in
the basket for the can, to keep the carb components grouped together. Put
the lid back on and save the dip for the next project - it'll do several
carbs before it gets to grungy to reuse.
----- Original Message -----
From: "Larry Braddock" <larrybraddock@ca.rr.com>
To: <datsun-roadsters@autox.team.net>
Sent: Tuesday, December 18, 2007 12:51 AM
Subject: [Roadsters] cleaning carbs
> I've got a couple of carbs off a 66 1600 that are gummed up and won't let
fuel
> flow thru from sitting with gas in them for who knows how long.
> Anybody with experience cleaning these up.
> I was going to dunk them in carb cleaner, but want to make sure it won't
> damage anything inside. I've also heard Pine Sol works well as a carb
> cleaner.
>
> Thanks, Larry
> ________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as msedlack@neo.rr.com
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|