Re: Ignition Wires (Re-post)

["Daryl Smith" <daryl_smith@telus.net>]

> The black ground wires are still puzzling.  I don't have a short section
> of wire to go from the (-) side of the coil to the distributor.

Dan,

The black (-) wire from the neg. side of the coil goes back into the harness
(taped) and back out about 6-8" further along that piece of the wiring
harness into the engine bay. You can use your continuity tester to confirm.
Cheers
Daryl
'66 1600