datsun-roadsters
[Top] [All Lists]

Re: Which Bay is greater?/more transmission woes

To: datsunmike@nyc.rr.com, mikeadam@wcnet.net, bholland@hayes.ds.adp.com,
Subject: Re: Which Bay is greater?/more transmission woes
From: "sidney raper" <spl310@hotmail.com>
Date: Tue, 24 Jul 2001 21:09:20 -0400
Prudhoe Bay!!

Sidney Raper
1964 1500
Jacksonville Florida
http://www.geocities.com/roadsternut/index.html




>From: "datsunmike" <datsunmike@nyc.rr.com>
>Reply-To: "datsunmike" <datsunmike@nyc.rr.com>
>To: "Mike Adams" <mikeadam@wcnet.net>, <bholland@hayes.ds.adp.com>,   
><dwoodru1@tampabay.rr.com>, <datsun-roadsters@autox.team.net>
>Subject: Re: Which Bay is greater?/more transmission woes
>Date: Tue, 24 Jul 2001 19:42:09 -0400
>
>Jamaica Bay!!!!!
>
>----- Original Message -----
>From: "Mike Adams" <mikeadam@wcnet.net>
>To: <bholland@hayes.ds.adp.com>; <dwoodru1@tampabay.rr.com>;
><datsun-roadsters@autox.team.net>
>Sent: Tuesday, July 24, 2001 9:25 AM
>Subject: Re: Which Bay is greater?/more transmission woes
>
>
> > Brian -
> >     Good advice - don't drive any further than
> > you must to reach a repair location.  Something
> > is loose or worn out and could drop down or out
> > and tear everything up.  The box/open end wrench
> > size is an inch and a half - you will need two of
> > them one to hold while you break the jam nut loose.
> > I'd also recommend a cheater pipe - that jam nut can
> > be very difficult to break loose.
> > Mike
> > BTW for the record - Matagorda Bay is better by far.
> >
> >
> > Mike
> > ----------
> > >From: "Brian Hollands" <bholland@hayes.ds.adp.com>
> > >To: <dwoodru1@tampabay.rr.com>,"Datsun Roadster Mailing
> > list"<datsun-roadsters@autox.team.net>
> > >Subject: RE: Which Bay is greater?/more transmission woes
> > >Date: 24, Jul , 6:29 PM
> > >
> >
> > >Woody,
> > >I'm thinking that that transmission ought to come out soon.  If it's 
>just
> > >tightening up the main shaft nut, it's a weekend job - Engine out, 
>Engine
> > >back in.  The trick is finding the right wrench.  I don't remember the
>size
> > >but it's big.  I borrowed one from a helicopter mechanic when I rebuilt
>my
> > >trans.
> > >Anyone know what size the 5-speed main shaft nut is?
> > >Brian
> > >
> > >
> > >-----Original Message-----
> > >From: owner-datsun-roadsters@autox.team.net
> > >[mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of
> > >dwoodru1@tampabay.rr.com
> > >Sent: Tuesday, July 24, 2001 10:05 AM
> > >To: datsun-roadsters@autox.team.net
> > >Subject: Re: Which Bay is greater?
> > >
> > >Ok, only if you don't mind driving around on 3 gears, and not in 
>reverse.
> > >I'm
> > >thinking I won't be ready for any long drives until mid-September at 
>the
> > >earliest.  Might be a little earlier with Brian's help ;-)


_________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>