Robert,
Both wires attach to the engine compartment wire harness. One does not go to
the fuse box. They are red w/a black stripe.
Hoon, if you can't find the wires it may be that the harness was taken off
or cut off. I've seen it done. Nothing surprises me.
66 Mike
----- Original Message -----
From: <Robert.Long@CSDInc.com>
To: <hoon@pixar.com>; <datsun-roadsters@autox.team.net>
Sent: Monday, August 21, 2000 5:06 PM
Subject: RE: reverse light switch
> I recently replaced the wiring for my reverse light on my 67.5. There
were
> 2 wires (I think Red/Black) that came from the switch at the tranny, up to
> the engine compartment, on the carb side. From there, I think 1 went to
the
> fuse box and the other went to the reverse light.
>
> I got a the new wiring from Sports Imports...Robert - 67.5 1600 - Abq
>
> -----Original Message-----
> From: Hoon Kim [mailto:hoon@pixar.com]
> Sent: Monday, August 21, 2000 2:39 PM
> To: datsun roadster mailist
> Subject: reverse light switch
>
>
> I'm trying to hook up my reverse light for a '67 1600. The switch
> that's on the tranny is pretty stuck in there. I'm gonna try a few
> more times to get it loose, but in the meantime, what kind of
> connection do I need, and is it ok to have the bolt out for a while,
> or does it need to be in there all the time. I know that I will need
> a new wire to connect from the tranny, but how does the wiring
> connect from the reverse light to the power supply to the tranny
> switch. I've looked at the wiring diagrams, and am lost. Thanks again
> for the help.
> --
> -----------------------------------------------------------------
> Hoon Kim
> ______\____ hoon@pixar.com
> :/_()_____()_; '67 1600
> -----------------------------------------------------------------
|