If the linkage between the pedal and the MC is too long the piston in the MC
won't move far enough (out) to open up the fluid return hole to let the brake
fluid that expands from heat retukrn to the resivoir. This causes the pressure
to slowly apply the brakes. Letting the car sit will allow the fluid to release
the brakes for a short while. add some slack to the linkage and you will
probably
be alright. Also, if there is still some air in the system it will also expand
if the linkage is not adjusted correctly.
Good luck.
Peace,
Pat
--
- Support Habitat for Humanity, A "hand up", not a "hand out" -
Pat Horne, Network Manager, Shop Supervisor, Hardware Guru
CS Dept, University of Texas, Austin, Tx. 78712 USA
voice (512)471-9517, fax (512)471-8885, UUCP:cs.utexas.edu!horne
|