Bill Zenkus wrote:
>
> Hello all, it's been a while since I've been on the list,
> and worked on my project, but now with my daughter
> graduating college it's time to get back to some serious
> work on the "B".
It *has* been a while, Bill. Good to hear from you.
>
> QUESTION FOR THE GROUP:
> Does anyone know if the BUICK 300 Heads will
> work with the 215 block bored just .030" over stock?
Wil has put 40k miles on such a combo. Right, Wil? Wil! Wil?.
> My concern is that the valves on the 300 heads will not
> clear the deck of of the .030" over stock block.
Not a problem, but you prob. don't want to bore a GM block .030
> (Pistons will be dished slightly to yield a 10:1
> compression with the 300 heads)
^^^
What combo is that? I don't think you can get 10:1 w. 300 heads, stock
rods and flattops even..
Are you sure?
> Any comments and recommendations will be appreciated from this
> group of "experts" regarding use of the 300 heads vs the stock
^^^^^^^^^^^^^^^^^^^^^
:) I am not one, but we do have experts here, not just "experts"..
Jan
|