>From pcb!michael.robertson Thu Jan 21 16:32:00 1993
James A. TenCate writes:
LM>you'll need to take off the nut. Then you can drill two or three 3/8 inch
LM>holes (around the big hole) to use for bolts to the flange. I drilled three,
LM>misdrilled one of them badly, so just bolted the 2 x 4 on with two bolts.
LM>Propped the 2 x 4 against the floor and used my breaker bar to undo the nut.
LM>Worked just fine. Piece of cake! Now all I've gotta do is get the seal out
:-)
To do that you need special tool RB421 or S316. :)
.MLR.
---
. DeLuxe. 1.26b #3601 . >
----
////////////////////////////////////////////////////////////////////////
/////// This article originated at The Batchelor Pad PCBoard BBS ///////
// Long Beach, CA ///// 1200-14,400 V.32bis+HST ///// +1 310 494 8084 //
////////////////////////////////////////////////////////////////////////
|