Dick, It's a very good Ratio and much Simpler!
Jerry M. Onks svcjmo@home.com
----- Original Message -----
From: "Dick Rasmussen" <rasmussend@mindspring.com>
To: "Jerry Onks" <svcjmo@home.com>
Cc: <autox@autox.team.net>
Sent: Saturday, December 01, 2001 2:57 PM
Subject: Minutes
> At 02:00 PM 12/1/01 -0600, Jerry Onks wrote:
> >Dick, your equation . . .
>
> I don't have an equation . . . I have three shop manuals that undoubtedly
> do some rounding in order to result in relatively "round" numbers. <grin>
>
> I also have a shop manual for a 1984 Nissan 200SX. It gives the toe specs
> in metric, inch, and MINUTES. Let's see, 60 minutes in a degree so the
> specified 8 minutes equals 0.1333 degree "equals" the specified 1.5 mm
> "equals" the specified 0.059 inch with a 185/70X14 tire. Sounds like the
> "ratio" is still reasonably close, or at least closer than the toe
> tolerance ranges most manufacturers specify.
>
> This is just too much fun. Time to do something else useless:-)
>
>
>
>
> Dick Rasmussen
> CM 85
> 85 Van Diemen RF-85 Formula Ford
/// autox@autox.team.net mailing list
///
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe autox
///
/// or try http://www.team.net/cgi-bin/majorcool
///
|