What class are you referring to Brian? Stock? I hope not. If it is SP,
isn't the whole induction system free?
AB
You can route the air to your airbox from anywhere you want, BUT you cannot
cut holes in other parts or remove other parts to do it. So, for example,
you can extend a tube from the front of the airbox to behind the foglamps,
BUT you cannot remove the foglamps. You can route the tube down to the
brake duct, BUT you cannot cut a hole into the brake duct (or use a
Euro-part
with such a hole, as is often done illegally).
Make sense?
Brian
98 M3/4 CSP
Justin Hughes wrote:
>
> OK, this time I actually have a serious question. I have an idea in my
head
> for rerouting my intake system before the air filter (stock in the stock
> airbox). Obviously this would bump me out of stock class, but where
would I
> land? Basically I'd just add some ducting to draw air from a cooler area
> such as under the car or from the front grill. No air cooling type of
> mechanism like an Iceman - just drawing from a different area. Oh, and
> normal aspiration - no turbo. I've been reading over the SP rules, but I
> can't figure out if a mod like this is legal in SP or not.
|