On the clutch that takes too much travel, is your bleeder valve on the top
> of the slave cylinder, with the inlet pipe on the bottom?
Yes it is installed correctly. What I don't understand is why moving the
slave back made no difference. Ed
----- Original Message -----
From: <Jay_Laifman@countrywide.com>
To: <Alpines@autox.team.net>
Cc: "Ed Esslinger" <edstiger@snowhill.com>
Sent: Monday, November 12, 2001 11:42 PM
Subject: Clutches and brakes
> On the clutch that takes too much travel, is your bleeder valve on the top
> of the slave cylinder, with the inlet pipe on the bottom? If not, it is
> backwards, and you probably have not gotten a good enough bleed. Did you
> change anything else? You said you used spacers to push the MC backwards.
> So it sounds like you have the MC on the back side of the bellhousing -
> which would be correct.
>
> On the brakes, I installed a .70 MC without servo. I got it from Pegasus
> off the shelf. Works great.
>
> Jay
|