Shouldn't be a problem, as replacing the 7/8" unit with a 3/4" one is a
common procedure when removing the brake booster - it gives a slightly
softer pedal when no booster is used.
Jon Arzt
Omaha, NE USA
----- Original Message -----
From: <ellis838@concentric.net>
To: <alpines@autox.team.net>
Sent: Thursday, February 15, 2001 7:13 AM
Subject: Wilwood M/C
> Hello,
> Question, is the Wilwood master cylinder with the 3/4 inch bore big
> enough to replace the stock 7/8 inch unit and not cause any braking
> problems due to the different bore size. I want to use the Wilwood to
> clear a set of side draft webers. Thanks Jim
|