Chuck:
Wow! HIGH TECH. You are the MAN!
I am not worthy, I am not worthy.....
Vance
-----Original Message-----
From: 6pack-bounces+vance.navarrette=intel.com@autox.team.net
[mailto:6pack-bounces+vance.navarrette=intel.com@autox.team.net] On
Behalf Of Chuck Arnold
Sent: Thursday, March 27, 2008 7:52 AM
To: Joseph Grant
Cc: Triumph 6 Pack; Friends
Subject: Re: [6pack] 02 sensor locations
I have a pacesetter header [again, really liked the one from Kingston in
England, but no time to get one this time]. The wide band O2 sensor is
mounted on top of the collector -- just after the pipes all come
together.
This is a heated sensor. It is hooked to an Innovate wide band meter --
LM-1. This is a recording device also. I also got an LM-3 axillary
box.
This allows me to record the rpms [from the Crane ignition]. The LM-3
has a
built in MAP sensor, so I have hooked the PI vacuum to it. Hope to have
the
car running this weekend. With this setup I can read MAP, RPM and O2 so
can
get the TR PI system dialed in. The devices allow 45 minutes of
recording,
so can capture actual run data. The Aux box also has built in linear
and
lateral accelerometers, so will be able to determine cornering forces
and HP
and Torque. A real rolling dyno of sorts. Results to follwo.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|