Vance:
You can check your coil springs to see if they match side to side by
measuring diameter of the coils, the wire diameter, and the number of active
coils (active means not touching another coil). If there is any
differences, you can check the spring rate at
http://www.iroczone.com/calcs/chassis.htm
I checked mine using a machinists square, a carpenters rule, and a vernier
caliper.
Ed Bratt
1976TR6
----- Original Message -----
From: Navarrette, Vance <vance.navarrette@intel.com>
To: Russ & Sandy <bungs4@wpia.net>; <6pack@autox.team.net>
Sent: Thursday, April 21, 2005 10:43 AM
Subject: RE: Suspension Problems
|