Steve-The .75" clutch master cylinder is available from TRF, Moss, BPNW, and
others. I used it to cure a release problem, as it does provide a little extra
throw at the slave cyl and is more tolerant of wear in the pivot points.
Having said that, if all the wear is removed from push rod clevis, bushings,
and
the pedal arm, the .7" master cyl will do the job. The pedal box is easily
removed to deal with the bushings and worn hole in the pedal arm, but some of
the
bolts under the wiper motor are a pain.
Berry Price
/// 6pack@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|