I thought of that and jumpered it with a piece of wire
figuring the lights would light up, this weekend I
will take apart the dash and see what really happened
inside that switch.
--- Doug Hofer <doug@triad.rr.com> wrote:
> With my '69, I think it's the flasher. It's located
> in the footwell of the
> passenger side, on the right side down at the
> firewall. The turn signals
> work occasionally, and then get stuck on, not
> flashing. I tried tapping the
> flasher with a wrench and it started flashing again.
> I have a part on
> order, and I'll let you know if that was it.
>
> ----- Original Message -----
> From: "Bill Moine" <bmoine@yahoo.com>
> To: <6pack@autox.team.net>
> Sent: Wednesday, March 12, 2003 12:33 PM
> Subject: Turn Signals
>
>
> > question: I recently bought a 76 TR6 and the turn
> > signals worked and now they don't. the car had
> sat
> > for 10 years and I think i was the first person to
> > pull the hazard switch... ofcourse the knob broke
> off
> > and i pushed the switch back in (and it went all
> the
> > way in) Will this prevent the turn signals from
> > working, from the wiring diagram it looks like the
> > power comes in to the turn signal ciruit via the
> > hazard swith?
|