Hi Jim,
You might just pull the coil wire and turn the key.
Jay
===========
On Thu, 26 Dec 2002 10:38:18 -0500 "James Henningsen" <jdhenn@cfl.rr.com>
writes:
> Hello listers and Happy Holidays! My brother and I are playing with
> his
> xmas present (76 TR6) and wondered if anyone out there knew the
> quick way to
> hot wire the starter in order to crank the engine. On my 75 I can
> use a
> screw driver to jump to terminals on the starter relay to start it
> without
> the ignition switch. We are eager to crank the 76 over in order to
> lubricate
> the cylinders and just hear it crank of course :) I already changed
> out the
> oil, put marvel mystery oil in the cylinders through the spark plug
> holes
> and poured the stuff down the oil galleries on top of the head. I
> turned it
> by hand a bit and it does spin freely but would like to have the
> starter
> turn it over without actually starting it. From Dan Master's great
> electrical book I see the wiring is slightly different to the relay
> so I
> don't think it will jump like my 75. Any quick thoughts out there?
> Thanks
> in advance!
> Jim Henningsen
> Kissimmee, FL
> 74,75,76 TR6
> 80 TR8
|