1. the manual says to grease the water pump...I can't find a sealing
plug
> to remove so that I could grease the darn thing?
The modern pumps have modern seals that do not need to be greased. You
may still see an old pump around with a nipple, but not many.
2. same thing with the rear Drive Shafts - I couldn't fine the nipples
to
> grease them.
Most of the TR6 cars have axles that must be split in two (inner and
outer) to grease the splines. I have seen one or two that had grease
fittings, but they may have been from a 4A IRS originally.
3. I had a hard time getting the grease gun nozzle to fit the nipple on
the
> outer universal joint?
I do, too.
Have fun!
Jim
|