Try using a wire brush. You can get 4" brushes that attach to a drill and it
works well. It worked for me. Then you can apply a coat of clear spray
paint.
Good luck,
Patrick
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net]On
Behalf Of James Henningsen
Sent: May 20, 2002 6:59 PM
To: 6 Pack TR6 List
Subject: Clutch Master Cylinder Restoration
Howdy listers,
I have a good used clutch master cylinder - perfect bore, but it looks
like doody (dirt and wear) on the outside. I have wiped down with goof
off but it didn't help, tried a little dremel tool buffing but it didn't
work well. Any ideas on how to restore the outside to make it look like
new. I have tried repainting before but the aluminum spray paint never
"stuck" well. Any ideas would be appreciated!
Thanks in advance!
Jim Henningsen
Kisssimmee, FL
75 TR6
80 TR7 & 8
|