My '69 has the commission plate over the left fender. It has the
commission number color and trim codes on that plate. The emissions
sticker is on the left underside of the hood (or is it bonnet). The
car was restored in 1989-90 time frame. I believe it is original
condition though.
Jon Fry
TR6 1969 CC26464L
Jon@Fry.net
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net]On
Behalf Of dstauffa@csc.com
Sent: Tuesday, April 02, 2002 10:40 AM
To: Mark Hooper
Cc: '6pack@autox.team.net '; owner-6pack@autox.team.net
Subject: RE: application of emissions decal/label on fender under the
bonn et
Mark,
I think that on the 1972 and earlier models the emissions data was on
a
plate pop-rivited to the front LH inner fender.
As a side note, on my 1970 TR6, when I was stripping it down, I looked
for
my commission plate on the B post but none was to be found! Later I
discovered that what was supposed to be my emission plate on the front
inner fender was in fact my commission plate. I guess this was
correct for
non North American TR6s.
Dave
Ramona, Ca
1970 TR6 RHD
Strangely I have only two rivet holes on the top inside fender on the
drivers'side(LHD). I bought the car in 1986 and it was like that. I
always
assumed it was some sort of metal nameplate that went there. The
chassis ID
is on a silver metal strip riveted to the firewall on the right-hand
side.
So what is supposed to go on top of the left wheel arch of a 1972 TR6
cc83453O ?
Mark Hooper
|