Patrick,
The "Autobooks" "TR5 & TR6" manual (Kenneth Ball-Autopress Ltd. #826
c1975), shows just such a tool on pg. 124 (fig. 12:8).
The working end is a 1/2" wide blade with a hook formed at the end (1/8"
radius with a bout 1/4" return - not quite a 180 degree bend maybe 160
degrees). The blade material is specified as 16 gauge. It is shown to
be 7" long, with a loop formed at the end to pull on. I am not sure why
it would need to be this long for the window seals, but there may be
other uses that require this length.
I seem to recall seeing the same illustration in one of the Moss
catalogs.
If the description is not enough information, I might could photocopy
and send it to you, email me at home, If that is the case.
HTH
Mark Riddle
"72 TR6
|