Nelson;
Is your new comcast ID a high speed cable access?
Just curious.
Jeff Johnson
'76 TR6
Oh, and I concur on the P/C'ing of calipers.
05:36 PM 2/21/02 -0500, Robert L. Gannon wrote:
>I would suggest you defray from powder coating the calipers. When the
>calipers are cleaned and the powder is applied, the calipers would be put
>into an oven at about 500 degrees to bake the powder. The seal inside would
>then be baked and fail to do the job it was intended to do. Also it is
>highly suggested that you NOT separate the two halves. Sure you could put
>them back together but they would always leek!
>Robert L. Gannon
>
>Please be advised that as of February 28th my e-mail address will be
>trsix74@comcast.net
>TR6 1974 CF22956U
>TR3A 1960 TS70951L
|