6pack
[Top] [All Lists]

RE: Pull My Finger/sugg

To: <6pack@autox.team.net>
Subject: RE: Pull My Finger/sugg
From: "Creamer, Mark" <CreamerM@cintas.com>
Date: Tue, 29 Jan 2002 11:02:37 -0500
Maybe it's another one of those items that were applied to some but not
all? I have seen 250s that have them that had not been modified by the
owner

<mc>

-----Original Message-----
From: Peter Macholdt [mailto:vze2846b@verizon.net] 
Sent: Tuesday, January 29, 2002 10:54 AM
To: 6pack@autox.team.net
Subject: Re: Pull My Finger/sugg

Todd,

As an owner of a TR250, I can categorically state that they did not come
with finger pulls.  I can't speak to the '69 TR6.

For reference see Piggott book, TRF catalog, etc.

Peter
'68 TR250


> From: "Todd Bermudez" <red_tr250@hotmail.com>
> Reply-To: "Todd Bermudez" <red_tr250@hotmail.com>
> Date: Tue, 29 Jan 2002 09:01:09 -0500
> To: hlub34a@aeroinc.net, hfader@usa.net
> Cc: 6pack@autox.team.net
> Subject: Re: Pull My Finger/sugg
> 
> The finger pull was also installed on the TR250...maybe the '69 TR6??
> 
> Todd
> 
> 
>> From: "Valerie Stabenow" <hlub34a@aeroinc.net>
>> Reply-To: "Valerie Stabenow" <hlub34a@aeroinc.net>
>> To: "Hugh Fader" <hfader@usa.net>
>> CC: <6pack@autox.team.net>
>> Subject: Re: Pull My Finger/sugg
>> Date: Mon, 28 Jan 2002 21:54:25 -0600
>> 
>> I believe that the finger pull was designed for the tr4s. I tried to
put
>> one
>> on my 6 and then realized it was a lost cause. If you replace the
little
>> rubber pads inside (they go in the holes around the perimeter of the
glove
>> box, they will help open the glove box door..sort of a spring action.
>> 
>> Valerie Stabenow
>> 
>> ----- Original Message -----
>> From: "Hugh Fader" <hfader@usa.net>
>> To: "Triumph Mailing List (E-mail)" <triumphs@autox.team.net>; "6
Pack List
>> (E-mail)" <6pack@autox.team.net>
>> Sent: Monday, January 28, 2002 7:37 PM
>> Subject: Pull My Finger
>> 
>> 
>>> Hello.
>>> 
>>> I just bought a finger pull for the glovebox lock on my TR6. I am
hoping
>> to
>>> eliminate the leather lace that the previous owner tacked on so that
the
>>> darn thing could be opened. I'm having some trouble fitting this
thing.
>> It
>>> looks like I will have to enlarge the hole for the lock about 1/8".
I
>> would
>>> like to avoid doing this. Anybody have any tips on installing the
finger
>>> pull? Better yet, anybody have any tips on making the glovebox open
>> easily
>>> without the finger pull? Other TR6's I have seen have a similar
problem.
>>> 
>>> Thanks,
>>> Hugh Fader
> 
> 
> 
> 
> _________________________________________________________________
> Join the worlds largest e-mail service with MSN Hotmail.
> http://www.hotmail.com

<Prev in Thread] Current Thread [Next in Thread>