Re: Block/Liner Question

[BFE KEN G <BFEKENG@aol.com>]

IRV, On some engines (TR-6) a composition gasket is used which is thicker
than the shim steel most 4cyl TR racers.In adition a generous amount of
original deck height is also provided.To get maximum compression it becomes
necessary to zero deck the block & rely on the thicker gasket for clearance
 The piston & rod combo stretch on all engines proportional to the rpm &
we are back to no two things in the same place at the same time bit.

                                                  KEN G.