Re: [TR] Clutch Fork Pin

["Dave" <dave@ranteer.com>]

and probably everyone but me knew that you should oil the drill bit 
periodically

-----Original Message----- 
From: Greg Lemon
Sent: Saturday, July 06, 2013 10:32 PM
To: Bud R
Cc: triumphs@autox.team.net
Subject: Re: [TR] Clutch Fork Pin

I just drilled the extra hole all at once, quarter inch, grade 8 bolt with a
nyloc nut.  The shaft is pretty hard steel, I am mr. cheapo, but it
definitely pays to go to the hardware store and buy a new expensive drill
bit for the job.

Good Luck, Greg 

** triumphs@autox.team.net **

Archive: http://www.team.net/archive