I just drilled the extra hole all at once, quarter inch, grade 8 bolt with a
nyloc nut. The shaft is pretty hard steel, I am mr. cheapo, but it
definitely pays to go to the hardware store and buy a new expensive drill
bit for the job.
Good Luck, Greg
--------------------------------------------------
From: "Bud R" <levilevi@comcast.net>
Sent: Saturday, July 6, 2013 7:57 PM
To: "James Henningsen" <trguy75@gmail.com>
Cc: <triumphs@autox.team.net>
Subject: Re: [TR] Clutch Fork Pin
> Jim, you can do it. Drill the hole for the fork first and then use
> that as a guide for drilling the shaft. It doesn't have to be THAT
> precise as you're installing a bolt with a nut. Guaranteed you will
> sleep better if you do this mod. And as an added bonus you won't have
> to be precise about the torque on the original clutch fork pin. Snug
> tight will be good enough.
>
>
> Bud
>
> Extreme Parts Racing (more than just a haircut)
> 71 Spitfire MK IV Race Car #3
> 71TR6 CC57365 (Good 6)
> 93 Minnie Winnie Race Support Vehicle
> 77 Z-50A Hardly Davidson Honda Mini-Trail Bike (Triumph Pit Bike)
>
>
>
>
>
>
>
>
>
> On Jul 6, 2013, at 4:03 PM, James Henningsen wrote:
>
>> I have a new clutch fork and hardened pin from Moss. How tight do I
>> tighten
>> this pin into the fork? Is there a torque setting? Should any
>> threads be
>> showing? I didn't really want to have the cross shaft and fork
>> drilled for
>> the bolt upgrade as I don't have a drill press and knowing me, I
>> would ruin
>> it. Aren't there upgraded hardened pins grade 8 and shouldn't they
>> work
>> fine?
>>
>> Thanks in advance,
>>
>> Jim Henningsen
>>
>> Ocala FL
>>
>> 62 TR4
>>
>> 75 TR6
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/levilevi@comcast.net
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/glemon@neb.rr.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|