triumphs
[Top] [All Lists]

[TR] Update on addco sway bar

Subject: [TR] Update on addco sway bar
From: spook01 at comcast.net (spook01@comcast.net)
Date: Sun, 22 Apr 2012 10:57:45 -0400
You guys may remember I bought an addco sway bar for the front of a early 
(ct3xx) TR4.
It did not fit.
Basically, the problem is that the bar's side arms are too short to allow the 
bar to be mounted high enough on the front bumper supports to allow the bar to 
be level, and allow the links to be vertical.
I was contacted by Addco, and told that if I would send info they would make a 
bar that works.
I was happy to help and sent photos and measurements to the individual who 
contacted me.
Unfortunately, since then, silence.
These bars do not fit the early cars correctly, and use of the bar as supplied 
stress the bumper supports due to the incorrect design.  Just a word to the 
wise, especially if you are buying off eBay.
Further updates if I hear anything.
Ray 


Sent from my Verizon Wireless Phone

<Prev in Thread] Current Thread [Next in Thread>