> Hi, I am in the process of installing a hazard flasher set-up into my TR4A.
> When looking at the wiring schematics of the TR6s I noticed that a relay
> sending power directly to the 4 turnsignals was eliminated from 1972 on. At
> the same time hazard switch was changed from a toggle to a pull switch.
> Wondering why this relay was not used anymore. Not required with the pull
> switch?
Exactly. The pull switch is complicated enough to not need the relay to make
all the appropriate connections.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|