Re: Separating hub from disc

[Rikrock@aol.com]

In a message dated 4/4/04 5:46:39 PM Eastern Daylight Time, hfader@usa.net 
writes:


> . Is there a
> trick or a tool that I need to do this?
> 
> 
 
The tool is called a  (BFH) hammer, the trick is to hit it hard ;-)

Seriously, use a block of wood on the inside of the hub, support the rotor on 
some other blocks and give it a good whack (or two).

Rich Rock
Pottstown, PA