I find it easiest to use an "allen" wrench. Various sizes,
flexible,
and won't poke holes in your other hand like those pesky
awls.
bob mclaughlin
1971 TR6
Seattle, WA.
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of
JASandPJS@aol.com
Sent: Thursday, September 12, 2002 2:34 PM
To: triumphs@autox.team.net
Subject: door panel
This may seem like a silly question to those that have done
it before, but I
haven't and can't figure it out. I need to remove my door
panels on the 6.
Now I know you need to push in on the panel at the door
handle and window
crank to see the small holes behind them and then you need
to push out the
pins holding them in place. Tried this with a screwdriver
but every
screwdriver I have with a head narrow enough to push through
the holes is too
short. Is there a special purpose tool for this? Didn't
want to force
anything since I didn't want to screw up a prefectly good
door panel. Thanks
John, '71TR6
Charleston, WV
Bob
'71 TR6
Seattle, WA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|