triumphs
[Top] [All Lists]

RE: Belt pullies for alternator conversion

To: TR List <Triumphs@autox.team.net>
Subject: RE: Belt pullies for alternator conversion
From: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Thu, 25 Apr 2002 08:55:53 -0700
> Will an alternator start without this "idiot" light?  Yes it will.  Here's
> some empirical evidence:  On day, as an experiment, I
> disconnected the wire
> to the charge light on my TR6 (which had sat idle for at least a week) and
> started it up. I slowly increased the engine speed until the charging
> circuit kicked in (as indicated on my ammeter).  The alternator started
> working at about 1700 RPM.  With the light connected it usually
> kicks in at
> 1200.

This seems to vary with the alternator (possibly depends on the
characteristics of the regulator, or even on the material used in the
rotor), but the old Ford unit I used on my TR3A would not self-start even at
5000 rpm.  With only the original ign lamp, it wouldn't reliably start below
about 3000 rpm.

Randall

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>