I used the Canton remote filter adaptor #22-595 Ford, Mopar, and
applications with 3/4-16 Thread & a 2-5/8" standard seal.
shown at the following webpage.
http://www.cantonracingproducts.com/adapters/remote_filter.html
It screws onto the existing nipple, gives you two oil lines which are routed to
the remote filter inside the left fender. They sell the remote filter hanger
too.
I used Earl's fittings and hose for all plumbing.
Curtis
B9470844
-------------- Original message --------------
> Guys:
>
> I too am interested in getting rid of the leaky oil filter carbuncle on the
> left front of my restored MkII. Problem I have is that the MkII is fitted
> with the factory twin-tube oil cooler, which in turn connects to a piece
> fitted between the block and the oil filter.
>
> Anyone have a remote oil filter solution I can use on the MkII that will
> accommodate the oil cooler feed lines?
>
> Cheers,
>
> Wayne
|