Y'all gotta look at this with the space in a different place, then you'll
realize it comes from the same place, which notches another arrow and smiles!
----- Original Message -----
From: Al Terego
To: tigers@autox.team.net
Sent: Saturday, November 16, 2002 10:13 PM
Subject: Re: Spare tire hold down length
The worst thing about this list is the misinformation coming from supposed
experts.
ccc@
>The Alpine did not have a hold down screw, nor did it rest on the floor.
>I stood vertically against the forward trunk wall, in the small well
>provided in the bottom, and was held with straps.
>
>The Tiger fitted the wheel front side down, and a short bolt screwed
>into a Tiger-only fitting on the floor thru a wheel hold-down central
plate.
>
>Steve
|