Thanks Jay. Based on this info and the physical evidence I have I'd say
the Tiger hold down is ~2" and the other (Alpine?) ~1-3/4". The one I
measure at 2" is the broken off one I retrieved from my Tiger trunk
floor mount. It looks like the "good" one I have is off an Alpine. Not
much difference between the two.
Frank
B9471116
> -----Original Message-----
> From: Jay Peterson [mailto:sfm081@rain.org]
> Sent: Sunday, November 17, 2002 6:31 PM
...
>Taking that dimension and the
> thickness of the plate into account, the distance from the
> back of the bolt is closer to a little under 2" for the one I
> have.
...
|